3DXHeli.com
>
Freewing 16 (Gray)
Thrust Vectoring Jets are now here! This jet will take flying to a new
level. You will not believe what you can do with thrust vectoring. This is
for advanced pilots only. It is very acrobatic and able to fly inverted,
rolls, and loops with ease. The front nose wheel is designed to be steerable
using the fifth servo. This model has a high roll rate and even can do the
famous "cobra maneuver" flight. When using the 70mm fan, this jet has a high
thrust to weight ratio.
This ARF Comes with:
Pre-painted EPS Styrene Foam Parts
Fuselage has pre-intalled control horns and servo extensions
Landing gear wire and foam wheels (three wheels)
Includes 64mm ducted fan case, adapter, and rotor blade
Clear Canopy with Pilot and Foam Nose Cone
Full Color Water Swipe Decals preinstalled
Includes 2 part epoxy glue
Two Model Missles
CD ROM Illustrated Instruction Manual
Other Accessories that you will need
to make this fly:
Ducted Fan - We recommend replacing the fan and using a 70mm fan. A 70 mm
fan will fit inside the fuselage. ELE DF28XL 70mm (3800kV) Power System is one
option for a complete power system. Another option is to use the DF70 Ducted Fan
Unit with 3.17mm Hub Adapter paired with a Feigao 3808412S Brushless Motor 12
Turn, 3.2mm Shaft, 34A, 3290 RPM/V.
Speed Control - BP 45A Brushless ESC
BEC - CC BEC SWITCHING REGULATOR
6 Channel Receiver - Corona RD620 or equivalent
6 micro servos - Power HD 1800A or BMS-373BB Ball Bearing Micro Servo
Battery - PolyQuest XP Lithium Polymer 11.1V 2200mAh 25C
Suitable battery and motor connectors